Concrete can be a very tough material to work with, and if you’re not careful you can end up with power steering fluid all over your hands and arms. In this article, we’ll show you how to get power steering fluid out of concrete without having to scrub or break the concrete apart.
How to get power steering fluid out of concrete
If you have power steering fluid in your driveway, there is probably a way to get it out. If the fluid has solidified, you can use a plunger or bucket to break up the blockage. You can also use a power drill with a cutting attachment to remove the blockage from the bottom of the reservoir.
What are the dangers of power steering fluid in concrete?
Power steering fluid is a petroleum-based product that gets mixed with water when the steering system is flushed. If this mixture collects in the lines, it can create a dangerous situation. The oil and water can cause a fire if they come into contact with each other. In addition, power steering fluid can also damage the concrete while it’s still wet. This can lead to cracks and eventually catastrophic failure of the concrete foundation.
How to remove power steering fluid from concrete
If you have power steering fluid on your hands, there is no need to panic. Just follow these simple steps and you will be able to get the fluid off of your concrete.
1. Pour a bucket of cold water into the driveway or garage. This will help shock the power steering fluid and break it down.
2. Pour a liberal amount of liquid detergent into the bucket. This will help loosen up any dirt, grit, or debris that may be in the power steering fluid.
3. Swirl the bucket around so that the detergent covers all of the concrete. Let the mixture sit for about 20 minutes, or until the concrete is wet but not dripping.
4. Use a hose to spray the mixture onto the ground in front of your car. Be sure to get all of the fluid off of your car!