A power steering pump pulley is a component of your vehicle’s power steering system. It helps transfer energy from the engine to the power steering pump, which in turn helps you steer your car. If your power steering pump pulley is damaged or worn out, it can cause problems with your power steering system. In this article, we’ll show you how to install a new power steering pump pulley in your car.
Tools and Materials Needed
In order to install a power steering pump pulley, you will need a few tools and materials. First, you will need a power steering pump pulley removal tool. This can be rented from most auto parts stores. Next, you will need a new power steering pump pulley. These are available at most auto parts stores as well. Finally, you will need a torque wrench to properly tighten the new pulley in place.
Instructions
1. Jack up the car and remove the wheel. Disconnect the negative battery cable.
2. Loosen the power steering pump pressure hose clamp and disconnect the hose from the pump.
3. Loosen the power steering return hose clamp and disconnect the hose from the pump.
4. Remove the three bolts that hold the power steering pump pulley to the pump using a socket wrench and extension.
5. Pull the pulley off of the shaft of the power steering pump.
6. Reverse Step 5 to install the new power steering pump pulley onto the shaft of the power steering pump.
7. Reconnect both hoses to their respective fittings on the power steering pump and tighten each clamp securely with a screwdriver.
8. Reinstall the wheel, lower the car, and reconnect negative battery cable
Tips and Tricks
If you’re looking to install a power steering pump pulley, there are a few things you need to know. First, it’s important to choose the right size pulley for your engine. If you have a small engine, you’ll need a smaller pulley, and vice versa. Second, make sure the pulley is properly aligned with the power steering pump before you install it. Third, use the proper bolts and nuts to secure the pulley in place. And fourth, don’t forget to torque the bolts to the specified value in your car’s manual. Following these tips will help ensure a successful installation.
Conclusion
Installing a power steering pump pulley is not difficult, but it is important to follow the instructions carefully. With a few tools and a little bit of time, you can easily install a new power steering pump pulley and get your car back on the road.