A power steering pump is a vital component of a car’s power steering system. As the name suggests, it pumps hydraulic fluid from the reservoir to the steering gear. This fluid pressure assists in turning the wheels. If your power steering pump is not working properly, you will experience difficulty in steering your car. In this article, we will show you how to install a power steering pump in your car.
What You Will Need
1. Power steering pump
2. New O-rings
3. Power steering fluid
4. Funnel
5. Wrench set
6. Ratchet
7. Socket set
8. Screwdriver set
9. Hammer
10. Chisel
11. bolts
Step One – Preparing the Vehicle
The first step in installing a power steering pump is to prepare the vehicle. This includes disconnecting the battery, removing the old pump, and cleaning the area where the new pump will be installed. Once the area is clean, you will need to install the new power steering pump.
Step Two – Installing the New Pump
Installing the new power steering pump is a fairly simple process. First, you will need to connect the new pump to the power steering fluid reservoir. Next, you will need to connect the hoses to the pump. Finally, you will need to connect the electrical wiring to the pump.
Step Three – Testing the New Pump
Once the new pump is installed, it is important to test it to make sure it is working properly. To do this, simply start the vehicle and turn the steering wheel from side to side. If the power steering pump is working properly, you should feel a difference in the amount of effort required to turn the wheel.
Step Four – Installing the Power Steering Pump
Now that you have the old pump unbolted and out of the way, it’s time to install the new one.
1. If your new pump came with a pulley, go ahead and bolt that onto the shaft of the pump now.
2. Line up the new pump with the holes in the engine block and bolt it in place. Make sure to use new washers and nuts, and to torque the bolts to the proper specifications.
3. Reattach the power steering hose to the new pump using a new O-ring seal. Torque the fittings to spec.
4. Bleed the power steering system according to your shop manual’s instructions.
Step Five – Checking the Installation
Now that you have your new power steering pump installed, it’s time to check the installation. Make sure all of the bolts are tight and that there are no leaks. Start the engine and turn the steering wheel to make sure the pump is working properly. If everything looks good, you’re ready to hit the road!
Conclusion
Installing a power steering pump is not as difficult as it may seem. With the proper tools and a little bit of know-how, you can easily install a power steering pump in your car. Be sure to follow all of the manufacturer’s instructions when installing your new pump, and if you have any questions, be sure to ask a professional for help.