Jacking a car from the rear is a common crime that can lead to serious injury or death. In this article, we’ll teach you how to jacked a car from the rear in the safest way possible.
What You’ll Need
To jack a car from the rear, you’ll need a few basic items:
-A flat surface to work on (a driveway or courtyard is perfect)
-An adjustable wrench
-A socket set
– lug nuts
-a jack
-A screwdriver
-A tow bar
First, position the car so that the front of the bumper is resting on the flat surface. Make sure the tires are off the ground and remove any objects that may get in your way. Next, place the adjustable wrench on the nut at the top of the jack and turn it until it’s loosened. Remove the nut by hand and place it aside. Repeat this process for each lugnut.
Now it’s time to raise the car. Place one end of the tow bar under one of the front wheel wells and hold onto it with your hand. Position the other end of the tow bar under one of the rear wheel wells and tighten it by turning it until it’s snug. Raise both ends of the tow bar until they’re level with each other and pull down on them to lift up the car.
Carefully move it to where you want it and safety tie it down with screws
How To Jack A Car From The Rear
If you’re stuck in a car and need to jack it up, there are a few different ways to do it. Here’s how to jack a car from the rear:
1. Open the trunk. If the car has a manual trunk release, press the button and open the trunk. If the car doesn’t have a manual trunk release, use a key to unlock and open the trunk using the emergency release.
2. Position yourself next to the rear wheel well and grab hold of the wheel well lid with both hands.
3. With your feet flat on the ground, lift your hips and torso until you’re standing up straight.
4. Reach under the car and hook your thumbs around either side of the frame rail, then pull up straight while pressing your upper body against the car.
5. Use your legs to help you push against the car and move it towards you until you can open the vehicle’sjack point (usually located on top of a rear wheel).
6. Reach inside and unfasten the jack point, then立刻就能打開車子了。
Tips For Success
When you jack a car from the rear, you need to be aware of some important safety tips. First and foremost, make sure you have a secure footing before beginning. Also, be careful not to injure yourself while performing this task.
Once you have a secure foothold, start by pressing down on the car’s bumper with your feet. Use your hands to pull the emergency brake lever and use the momentum of the car to push down on the jack handle. Be sure to keep your balance as you work, and use caution not to fall or roll the car.
Once the car is jacked up, unscrew the jack handle from the bumper and remove it from beneath the car. Be sure to store it safely so that it doesn’t get lost or damaged.