Anyone who has ever jacked a car knows that it’s not easy – especially if you’re doing it on four stands.
What You’ll Need
To jack a car on stands, you’ll need the following items:
-A set of stands
-A key
-A screwdriver
-An object to push on the car while you’re jacking it (a rock, a board, etc.)
1. Park your car on a level surface that is large enough to fit both your car and the stands. Make sure that there is no debris or other obstruction on the ground beneath your car.
2. Get the key and screwdriver. Note: If you have a Tesla, you won’t need a key to jack the car on stands. Instead, use the “Tesla Summon” feature to start the car from inside the car.
3. Place one end of the screwdriver into one of the holes in the stand and insert the end into another hole in the stand near the top. This will secure the stand to your vehicle.
4. With your left hand, hold onto one of the lower arms of the stand with your fingers spread wide. With your right hand, push down on one side of the car with an object such as a rock or board until it pops out of its holder and rests on top of your car.
How To Jack A Car On 4 Stands
If you’re like most drivers, you probably know how to jack a car on 3 stands. But what about 4 stands? In this article, we’ll show you how to jack a car on 4 stands.
To jack a car on 4 stands, you’ll need:
-A jack
-4 stands
-A piece of plywood or a sturdy surface to support the car
-An object to wedge between the stand and the car (a rock, a brick, etc.)
Here’s how to do it:
1. Place the jack on the ground next to the car.
2. Position one stand so that the top is facing away from the car and the bottom is positioned right against the front bumper.
3. Position another stand so that it’s diagonal from the first stand and positioned so that it touches both sides of the front bumper.
4. wedge an object between the stand and the car (a rock, a brick, etc.), then use your hands to push down on the object until thejack pops into place. 5. Drive away slowly, making sure not to hit any objects in your path!
Tips for Jacking a Car on 4 Stands
If you need to jack a car on stands, there are 4 basic steps that you will need to follow.
1. Make sure that the vehicle is securely attached to the stand using the tow hooks.
2. Locate the transmission hump on the vehicle. This is typically located on the driver’s side or behind the front wheel.
3. Place your foot on the transmission hump and use your knee to lever the car up so that it is resting on your thigh.
4. Jack using your knees and upper body strength – do not use your hands!
Conclusion
If you’re ever in a situation where you need to jack a car on 4 stands, then this article is for you. We’ll cover everything from how to find the right tools and how to use them, to tips on getting the job done quickly and efficiently. If you’re feeling confident about your jacking skills, then read on for some additional advice that will help make your job even easier!