When you need to jack up a car, you will likely use either a floor jack or a car jack. Knowing the difference between the two can save you time and money. Here is a look at how to jack a unibody car with a floor jack.
What is a Floor Jack?
A Floor Jack is a large, sturdy tool used to lift and move cars and trucks. It is essentially an arm with a platform at the end, which can be pushed into the ground to push against the vehicle’s undercarriage and be lifted into the air.
How To Jack A Unibody Car With Floor Jack
If you’re looking to jack a unibody car with a floor jack, there are a few things you’ll need before getting started. The most important thing is to make sure the floor jack is able to support the weight of the car and its passengers.
You’ll also need some sturdy construction equipment, including a long 2×4 or 2×6, some pliers, and an adjustable wrench. Before beginning, be sure to read your car’s owner’s manual to learn about the proper way to secure the jack in place.
Place the 2×4 horizontally across the front and back of the car, about 1 inch from both ends. Use the pliers to grip one end of the 2×4 and fit it between the bottom of the frame on each side of the car. Tighten up the grip on the plier until it forms a U-shape.
Now use your adjustable wrench to tighten the U-shaped grip on both sides of the 2×4. Make sure that there is enough space between each side of the car so that you can lift it off easily. Once both sides are lifted off, use your long 2×6 to hold down one end of the now-free 2x
What are the Benefits of using a Floor Jack?
There are many benefits to using a floor jack for car jacking. The most obvious benefit is that it is a much more efficient way to jack a car than using a regular hand jack. This is because a floor jack can support a much greater weight, allowing you to lift the car considerably higher off the ground than you could with just your hands.
A floor jack also has other advantages over hand jacks. For example, a floor jack can be used to move heavy objects without fear of them falling or damaging them. Additionally, floor jacks are easier to use if you have limited mobility or if you are working in difficult conditions, such as in an awkward position under the car.
If you’re looking for an efficient and easy way to jack a car, then a floor jack is the perfect tool for the job.
What are the Disadvantages of using a Floor Jack?
There are a few disadvantages to using a floor jack when jacknapping a unibody car. The biggest disadvantage is that using a floor jack can cause more damage to the car than using a standard jack. Another disadvantage is that floor jacks are not always easy to use, and they can be difficult to move around.