When it comes to car maintenance, changing a tire can often be a chore that you only want to do when you have the time and the space to do it properly. But with today’s technology, there are ways to make this task much easier for yourself. In this article, we’ll show you how to jack up your car so that you can change a tire in no time at all.
What You’ll Need
Here are the items you’ll need to jack up a car to change a tire:
-Jack
-Lug wrench
-Tire iron
-Pipe wrench
-Wheel chocks
-Carabiner or rope
-Cargo net
-Work gloves
-Rags or a cleaning cloth
-Matches or a lighter
1. Start by locating the jack and lug wrench. On most cars, the jack is located underneath the car on the driver’s side. The lug wrench can be found on the front of the car near the wheel.
2. Remove any chocks from the wheels. Place the carabiner around the upper end of the wheel chock and tie it off securely.
3. Insert the pipe wrench into the screw on top of the jack and turn it counterclockwise until it pops out of the socket on top.
4. Position the jack under the car and line up the bolt holes on both sides of the vehicle. Use your hands to push down on the jack until it’s firmly in place.
5. Take note of how far up you have to raise the car in order to get at the tire. Mark this distance with a
How To Jack Up Your Car
There’s no need to call a tow truck or take your car to a mechanic—you can do it yourself in just a few minutes. Jacking up your car is a common way to change a tire, and it’s also an easy way to fix a flat.
To jack up your car, first make sure the parking brake is engaged. To do this, press and hold the brake pedal while turning the key to the “on” position. If the parking brake is properly engaged, the hazard light should illuminate green.
Next, remove the front wheel by turning it towards the ground. Make sure not to pinch any cables or wires as you do this. Once the wheel is free, slowly pull it off of the axle.
Now you can raise the car using jack stands or bricks. If using jack stands, place them at least 2 feet from each other and at least 2 feet from the side of the car. Once the car is jacked up, insert one end of thesocket into one of the stands and connect the other end to an electricity source.
What To Do If Your Car Won’t Jack Up
If your car won’t jack up, there are a few things you can do to get it started. One option is to try jacking up the vehicle from the front. Another option is to try turning the key in the ignition and then removing the key.
Tips for Safe Jacking
If you’re ever planning on jackknifing a car in order to change a tire, there are a few tips you should keep in mind to make the process as safe as possible for both you and the vehicle.
1. Always use jack stands in a safe location
Using jack stands in an unsafe location could lead to serious injury or even death. Always make sure your jackstands are situated in a safe area, such as on a level surface and away from obstacles.
2. Use the correct tool for the job
If you’re going to be jacking up your car with a standard Jack & Jack or JBA Jack, be sure to use the right tool for the job. Using the wrong tool could result in serious injury or damage to your car.
3. Be aware of potential hazards while jacking up your car
While jacking up your car, be aware of potential hazards such as power lines, traffic cones, and other cars. If you see any potential danger while jacking up your car, avoid it at all costs and contact emergency services instead.