Jacking up a car is a popular way to change the wheel on a vehicle. It can be done using several methods, but the most common is using a jack and a lug wrench. However, there are other ways to do it as well. In this article, we will cover five different methods for jacking up a car without a jack.
What You’ll Need
In order to jack up a car without a jack, you’ll need the following:
-A sturdy piece of wood
-A hammer
-A car’s height adjustment screw (if applicable)
-An Allen wrench or socket set
-Locking pliers (optional)
The basic steps are as follows:
1. Locate the car’s height adjustment screw. This can be found on either the front or rear suspension of the car. If it is not located on the suspension, you can use a hammer and a chisel to remove the screws that hold the adjustment unit in place.
2. Remove the adjustment unit. It may be held in place by either screws or welds, so be prepared to use your hammer and chisel accordingly.
3. Place the sturdy piece of wood beneath the car and adjust it until it is level with the top of the wheel well(s).
4. Use your hammer and Allen wrench/socket set to tighten the height adjustment screw(s). Be careful not to over-tighten them, as this could damage your car’s suspension.
5. Once tightened, use your locking pliers to secure the screws in place
How To Jack Up A Car Without A Jack
If you want to jack up a car without the use of a jack, there are a few different methods that you can use.
The first method is to use a hydraulic lift. This type of lift can be rented from many car dealerships and will cost around $100 per hour. Once you have obtained the hydraulic lift, you will need to find a car that is low enough for you to access the jack.
The second method is to use a piece of plywood and a weight. You can place the plywood on top of the car and place weights on each end of it. This method is easier if the car is taller than it is wide.
What to Do If Something Goes Wrong
If something goes wrong while jacking up your car, here are a few things to keep in mind:
1. Try to relax and stay calm. If you Panic or become overly frustrated, it can lead to accidents.
2. Make sure you have all the necessary tools and equipment before starting. Include a sturdy jack, clamp, rope, safety glasses and gloves.
3. Start by using the jack to lift the car only as high as is necessary to reach the bolts or screws that hold it down. Do not raise the car too high or you could rip the suspension or damage other components.
4. Once you’ve located the bolts or screws, use the clamp to secure the rope around them and pull up on the rope until the car is firmly secured.
5. Wear safety glasses and gloves at all times while working with your car; avoid getting grease or oil on your skin and clothes, which could cause an allergic reaction.
Conclusion
If you’re like most people, you probably don’t have a jack handy when you need one. Well, there is no need to worry any longer — this article will teach you how to jack up a car without using a jack. By following the simple steps outlined in this article, you should be able to get your car jacked up in no time at all. If you are ever in a bind and need to get your car jacked up quickly, give these instructions a try first!