If you’re having trouble trying to open your power steering reservoir, there are a few things you can do to try and diagnose the issue. First, check the fluid level and make sure it’s at the correct level. Second, check the fluid pressure and make sure it’s within the manufacturer’s specifications. Finally, if all of those checks fail and you still can’t get your power steering reservoir open, you might need to replace it.
Tools needed
A few tools that are necessary to open a power steering reservoir are a screwdriver, a socket wrench, and a wire brush. The screwdriver should have a bit that fits the size of the screw on the reservoir. The socket wrench should have a ratchet and a socket that fit the screw on the reservoir. The wire brush can be used to clean debris or corrosion from the screws on the reservoir.
How to open the power steering reservoir
If you’re ever in a bind and need to open your power steering reservoir, here’s how:
1. Park your car on an even surface so it will remain in one spot.
2. Turn off the car’s engine.
3. Remove the key from the ignition and remove the negative battery cable.
4. Open the hood of your car.
5. Locate the power steering Reservoir (sometimes referred to as a “power steering pump”) and disconnect the hose that leads to it.
6. Use a wrench or a screwdriver to unscrew the Reservoir from the mounting bracket.
7. Remove the Reservoir from the bracket and set it aside.
8. Open up the bleed screw on top of the Reservoir by turning it counter-clockwise with a wrench until it pops out of its hole.
9. Place a container below the bleed screw to catch any fluid that leaks out of the Reservoir while you are bleeding it out (you may also use a vacuum cleaner).
10. Close off the bleed screw by re-installing it in its hole, then turn clockwise until it’s tight (you may need to
Tips for maintaining power steering fluid levels
If your power steering is not working as it should, it may be due to a low fluid level. To check the fluid level, remove the cap from the reservoir and fill it to the “MAX” line with fresh fluid. If the fluid level is below “MIN”, add enough fluid to bring it up to the “MAX” line. Be sure to replace any leaking or contaminated fluid immediately.
Here are some other tips for keeping your power steering system in top shape:
-Check power steering fluid level every 3 months or when you notice a decrease in performance.
-Replace any damaged or leaking hoses and connectors.
-Wash power steering system components regularly with soap and water.
Conclusion
If you’re having trouble opening your power steering reservoir, there are a few things that you can do to try and fix the problem. First, make sure that the reservoir is properly inflated. Next, check for obstructions in the piping or hoses near the reservoir. Finally, if all of those tests come back clean, you may have to replace your power steering system. Keep in mind that these are only general guidelines; if the problem continues after following them, it might be time to seek professional assistance.