Just about any DIYer knows that waxing a car is a quick, easy way to make it look fantastic. But what you may not know is that there are different ways to paste wax and that each has its own unique benefits. In this article, we will teach you the different ways to paste wax and discuss the pros and cons of each. From here, you will be able to make an informed decision about the best way to wax your car!
Materials needed
In order to paste wax onto a car, you will need the following materials:
-Wax
-Latex gloves
-Cordless drill
-1/4″ bit
-Paint or sealant
-Car detailing cloth
-Clean, dry surface
There are many types of waxes on the market, so it is important to find one that is specifically designed for car waxing. Some common waxes used for automotive purposes are carnuba wax, carnauba and beeswax. These waxes have different properties that make them best suited for different tasks. Carnuba wax is the most durable and is used for covering entire areas of a car. Carnauba wax is less durable but is better at filling in scratches and providing a glossy finish. Beeswax is the least durable of the three and can be used as a polishing agent or to add shine to the paint. When choosing which type of wax to use, it is important to consider the surface condition of the car. If the car has a lot of oxidation or rust, then using a harder wax like carnuba may be more appropriate. On the other hand, if the paint is in good condition and only needs some
How to paste wax a car
There are a few methods for waxing your car. One is to use a paste and another is to use a wet strip. Paste waxing is the most popular method because it’s more forgiving than the wet strip method.
To paste wax your car, you’ll need:
-Wax
-A clean surface to work on (a driveway or parking lot will do)
-Three clean cloths
– Vehicle buffing pads or a microfiber cloth
– Gritty pad (optional)
1. Preheat your wax by heating it up in the microwave or in a pot on the stove until it’s very hot but notmelting. It should be about 120 degrees F when you put it in the microwave and 160 degrees F when you put it on the stove. NOTE: Wax can also be melted using an iron if you have access to one. Important: Do not allow wax to reach temperatures over 200 degrees F!
2. Place three clean cloths in front of you so that they are overlapping each other like a fan. On one of the cloths, spread a dime size amount of wax across the top. This will be your “wax template.”
Tips for success
1. Start by getting a clean, dry surface to work on.
2. Hold the wax paper against the surface you’re going to paste wax onto and use your fingers to smooth it out as much as possible.
3. Apply a thin layer of wax with a Paste Wax applicator, using smooth, even strokes.
4. Let the wax cool for about 5 minutes before buffing it off with a cloth or a microfiber towel.