Ford power steering pumps are notorious for going out at a crucial time, often costing drivers big bucks in repairs. In this article, we’ll show you how to rebuild a power steering pump on your Ford truck – it’s not difficult, and it’ll save you time and money in the long run.
Identification of the Issue
When your Ford Power Steering Pump fails, the result can be a loss of power and control in your car. If you’re experiencing this issue, it’s important to identify the problem as soon as possible. The following are three steps you can take to help determine the cause of your Ford Power Steering Pump failure.
1. Inspect the power steering system for signs of damage. This includes checking for leaks, cracks, and other issues.
2. Perform a pressure test on the power steering system. Doing this will let you know how much pressure is being exerted on the pump.
3. Review the schematics for your Ford Power Steering Pump to see if there are any issues with it. If there are, you can contact the manufacturer or a qualified mechanic to get help fixing it.
Inspection
The first step in rebuilding a Ford power steering pump is to inspect it. Look for any signs of water damage, wear or tear, or incorrect installation. Once you have identified the issue, take appropriate steps to fix it.
If you find that the pump is completely worn out, you will need to replace it. Remove the cover and verify that the motor is installed correctly. If not, install it correctly and reattach the cover. Check for any debris or corrosion on the gears inside the pump. If necessary, clean them with a degreaser before lubricating them with a synthetic oil.
Finally, replace the seals if they are deteriorated. Be sure to torque them to manufacturer specifications and reinstall the cover.
Repair or Replacement?
If your Ford power steering pump is failing, it’s time to repair it. However, if the pump is just starting to show signs of age, you may want to replace it. Here’s a look at the pros and cons of each option.
Repair: If your power steering pump is just starting to show signs of age, or if it’s been damaged in some other way, repairing it may be the best option. By doing this, you can save yourself a lot of money in the long run by avoiding replacement costs.
Replacement: If your power steering pump is already showing signs of wear (or failure), replacing it may be the best course of action. By doing this, you can avoid any future problems and get your car back on the road as quickly as possible.
There are a few things to consider when making a decision about whether to repair or replace your power steering pump. First, consider how much money you want to spend. Next, decide whether you’re more comfortable taking on a DIY project or hiring a professional mechanic. And finally, factor in how long it will take to repair or replace the pump (and any related parts).
Parts and Supplies Needed
To rebuild a Ford Power Steering Pump, you will need the following items:
Ford power steering pump
Ford or aftermarket fluid
Pump jack
12″ adjustable wrench
14mm socket
8mm socket
RTV silicone sealant
Lubricant (such as WD-40)
Procedure for Rebuild
Ford Power Steering Pump
When your Ford Power Steering Pump starts to make unusual noises, it’s time for a rebuild. Here is a procedure for doing just that.
1) Remove the power steering pump cover. There are two Phillips screws on each side of the cover. Remove them both.
2) Inside the cover, you’ll see four long bolts holding the pump in place. Loosen these bolts, then remove the pump.
3) Inspect the pump for damage. If it’s damaged, replace it with a new one.
4) Clean the inside of the pump housing and all of the gears with a mild solvent like acetone or methyl ethyl ketone (MEK).
5) Replace any worn or broken gears with new ones. Be sure to use compatible gears – some of Ford’s original gears aren’t compatible with other brands of power steering pumps.
6) Reassemble the pump using the bolts, washers and nuts that were removed in step 2. Tighten everything down until you’ve reached fingertip tightness. Don’t overdo it – you don’t want to strip the bolt heads or damage the pump shafts
Tips for a Successful Rebuild
If you’re thinking of rebuilding your Ford power steering pump, here are some tips to help make the process as smooth as possible.
1. Research the part you need
Before you even start shopping for parts, it’s important to do some research on the specific pump that needs to be rebuilt. This will help you identify which vendor has the best price and quality for the part.
2. Order the correct parts
When ordering parts, be sure to order the correct replacement part for your truck. Incorrectly ordering a pump could result in wasted time and money, so make sure to order the right part from the start.
3. Get started ASAP
Once you have all of your parts, it’s time to get started on the rebuild! The sooner you start, the sooner you’ll finish and be back on the road.