When it comes to car repairs, most of us are familiar with things like oil changes and tune-ups. However, there are a few more complex repairs that need to be done from time to time, and one of these is removing an ignition cover. If you don’t know how to do this, now may be a good time to learn. Not only does this repair require a bit of technical skill, but it’s also important for safety reasons. In the event of an accident, having access to the engine may be the key to saving your life. read on for steps on how to remove an ignition cover and get started on your next auto repair.
What You’ll Need
If you have a car with a removable ignition cover, then you can remove it for cleaning or repair. Before you start, make sure that the car is completely turned off and the keys are out of the ignition. To remove the cover, use a Phillips head screwdriver to pry it off from the surrounding frame. Be careful not to lose any screws as they may be needed later. Once the cover is off, you can access the spark plugs and wires. Make note of which wire goes to which plug, and disconnect them one at a time. Next, unscrew the three screws that hold each plug in place and pull them out of the engine compartment. Finally, remove the old spark plugs and replace them with new ones. Reattach the wires to their plugs and screw them back into place.
How to Remove a Car Ignition Cover
There are a few different ways to remove an ignition cover. One is to use a screwdriver to pry it off from the bottom. Another way is to use a key removal tool or a small flathead screwdriver. If the cover is stuck, you can try using a hammer and chisel to chip away at it until it comes off.
Tips for Removing a Car Ignition Cover Safely
If your car has an ignition cover and you need to remove it for any reason, be sure to follow these safety tips:
1. Turn off the engine and wait 10 seconds before trying to remove the cover. This will allow the warning light on the dashboard to turn off.
2. Use caution when removing the cover – it can be heavy and spring-loaded. Use a flat surface to help support it while you remove it.
3. Once the cover is removed, be sure to store it in a safe place – preferably out of reach of children.