Britax makes some of the best baby car seats on the market, but like many other brands, they also make a safe cell car seat. Safe cell car seats are designed to protect children in the event of a crash. They’re also one of the most common types of car seats sold today. If you’re considering purchasing a Britax safe cell car seat, there are a few things you need to know first. In this blog post, we’ll outline the steps you need to take in order to remove it from your vehicle. We’ll also provide a step-by-step guide so that you can do it safely and without any damage.
What are the steps to remove a Britax Safe Cell Car Seat?
There are a few different ways to remove a Britax Safe Cell Car Seat, depending on the model. If your car has a seat belt pre-tensioner, you can release the tension by pulling up on the belt. If your car doesn’t have a seat belt pre-tensioner, you’ll need to use tools to remove the screws that secure the base of the car seat. Some models have two screws, while others have four or six. Once the screws are removed, you can lift up the car seat and remove it from the vehicle.
The tools you will need
The tools you will need:
-Phillips head screwdriver
-Ruler or a straight edge
-Hammer and nails
-Screwdriver bit for screws (or a nail gun)
-Tape measure
-Circular saw or handsaw with a guide rail
-Paint or a sealant to protect the wood
-Stiles and/or rails installed in your car’s flooring to support the car seat (optional)
If you have stiles and rails installed in your car’s flooring, you can skip the steps below. Otherwise, follow these instructions:
1. Remove the seat from the car. Britax recommends disconnecting all cables before removing the seat.
2. Disconnect all of the straps attaching the seat to the car using a Phillips head screwdriver. If your child is using a Safe Cell Car Seat Base, remove it as well and set it aside.
3. If your child is not using a Safe Cell Car Seat Base, remove all of the screws that secure the base to the car using a screwdriver bit. You’ll need at least eight screws to secure the base to the car; six on each side, plus two that hold it in place near the front and rear seats. Keep track of which screws go where so you can reinstall them correctly when you reattach the base later on. (Note: Britax recommends only attaching one side of
How to remove a Britax Safe Cell Car Seat
Britax Safe Cell Car Seat Removal
In order to remove a Britax Safe Cell Car Seat from your car, you will need the following items:
-A Phillips head screwdriver
-A straight edge
-A wrench
-Pliers
-A seat removal tool (optional)
1. Locate the four screws that secure the top of the car seat frame to the vehicle. Use a Phillips head screwdriver to remove these screws.
2. Gently pull up on the top of the car seat frame to detach it from the vehicle.
3. Carefully lift off the car seat and set it aside.
4. Locate and remove the two straps that secure the child restraint to the car seat frame. Again, use a Phillips head screwdriver to unscrew these straps. (Note: If you are using a seat removal tool, follow its instructions before removing these straps.)
5. Pull up on both sides of the child restraint until it is free from the car seat frame. Be sure not to tug on either strap as this could cause damage to it or your car!
6. Hang both sides of the child restraint by their elastic loops from one of your rearview mirror arms or window trim located above your headrests. If using a seat removal tool, follow its instructions before hanging each side of the restraint this way.(If you don’t have a suitable spot for hanging, you can simply place
Tips for installing a new car seat
If you have purchased a new car seat, be sure to read the installation instructions carefully. Here are some tips for installing a Britax Safe Cell Car Seat:
1. Position the car seat in the vehicle according to the instructions that came with it. Be sure to check all of the angles and make sure that the straps are tight against your child’s body.
2. Attach the shoulder straps by pulling them through their respective slots on each side of the car seat. Make sure that they are tight enough so that your child cannot move around in the seat, but not so tight that they cut off circulation.
3. Use the Latch system to attach the safety belt buckle to your child’s harness. If your child is too small or too young to use a safety belt, then you may need to use a tether strap instead. The tether strap attaches at one end to one of the car seats D-ring and at the other end to your child’s shoulder or upper arm.
4. Insert your child into the car seat and adjust it until it is snug but comfortable for him or her. Check again for any kinks or straps that may be excessive and make any necessary adjustments
Conclusion
Britax Safe Cell is a great car seat, but it can be tough to remove. Our tutorial will walk you through the process of removing Britax Safe Cell from your car. Be sure to read all the steps so that you don’t make any mistakes and end up with a damaged car seat!