If you’ve ever tried to remove car wax residue from a plastic trim, you know it’s not an easy task. Wax residue is exceptionally difficult to remove, and even more so if the trim is heavily stained with wax. In this tutorial, we will show you a quick and easy way to remove car wax residue from plastic trim using a household product. By following these simple steps, you will be able to clean your trim quickly and easily!
What You’ll Need
What You’ll Need
• Car wax • Q-tips or a cotton ball • A bucket or large sink • Vinegar • Detergent (optional)
Step 1
Wash the car with warm water and soap. Make sure to get all of the wax residue off. If you used a vinegar and water solution, rinse the car off.
Step 2
Pour enough vinegar into the bucket to cover the wax. Swish it around so that the wax is dissolved.
Step 3
Douse the area where the trim meets the surface of the paint with detergent if desired. Let it sit for about 10 minutes to work its magic. Rinse off any residue with clean water.
How to Remove Wax Residue From Plastic Trim
If you’re like most people, you’ve probably ended up with a bit of car wax residue on your plastic trim. Well, it’s time to get rid of it! Here are three quick and easy ways to remove wax residue from plastic trim.
1. Use a vacuum cleaner: If you have a standard vacuum cleaner, simply turn it on to its lowest setting and use the brush attachment to clean the trim. Be sure to hold onto the trim while you vacuum it, as the suction can be strong.
2. Use an old cloth: If you don’t have a vacuum cleaner or if the cleaning power of your machine is not enough, try using an old cloth instead. Just wet the cloth in water and wring out any excess before wiping down the trim.
3. Try a household cleaner: If all else fails, try using a household cleaner like 409 or Murphy’s Oil Soap. Just mix one part cleaning agent with two parts water and apply the solution to the trim in a circular motion. Let it sit for a few minutes before wiping down with a cloth or dryer sheet.
Tips for Removing Wax Residue from Plastic Trim
If you have plastic trim on your car, there is a good chance that wax residue has built up over time. This residue can be difficult to remove, but there are a few tips that will help.
1. Start by wetting the trim with water. This will help dilute the wax and make it easier to remove.
2. Use a small piece of cloth to rub the wax off of the trim. Be sure to use circular motions to avoid damaging the trim.
3. Immediately after removing the wax, clean the area with a soapy solution and dry off thoroughly before applying a new layer of sealant or paint.
Conclusion
Sometimes, we need to remove car wax residue from a plastic trim. Luckily, this task is relatively easy to accomplish using some common household items. First, wet the area where the wax residue is located. Next, mix a solution of warm water and vinegar together until the mixture is bubbly. Finally, apply the solution to the wax residue with a cloth or sponge and let it sit for a few minutes before wiping it off. Be sure to rinse the area thoroughly afterward to eliminate any residual vinegar smell or damage caused by the acidity of the solution.