If you have a car with a jack, then you know that it can be handy to remove metal fence posts that obstruct your driveway. This simple tutorial will show you how to do it quickly and easily.
What You’ll Need
To remove a metal fence post with a car jack, you’ll need the following:
-A car jack
-A metal fence post
-A wrench
-A screwdriver
-Pliers
-Hammer
-Nail or screws (if using screws)
Instructions
1. Location your metal fence post. It’s best to find one that’s close to the ground so you can easily access the screw holes.
2. Position the car jack over the post and make sure the wheel is on the ground.
3. Insert the wrench into one of the screw holes on the bottom of the car jack and turn it until it starts to loosen. Keep in mind that the screw hole might be in a tight spot, so use your pliers to help loosen it up if necessary.
4. Once the screw has been loosened, use your hammer and nail or screws to pry it out of the jack. Be careful not to damage the post!
5. Repeat steps 3 through 5 for each screw hole on the bottom of the car jack. Once all of them are loose, lift up the car jack and carefully remove the post from it.
How to Remove Metal Fence Post With a Car Jack
Are you looking for a way to remove a metal fence post from your driveway? If so, you’re in luck – using a car jack is an easy and effective way to do just that.
First, find the metal post. It’s usually slightly elevated above the ground, so you’ll need to use a vehicle’s height to locate it. Once you’ve located the post, use the car jack to hinge the front of the post downward until it clicks into place.
Now, use your wrench or pliers to take down the post. Be sure to wear gloves and protective eye gear when working with metal, as sparks can easily fly while removing the post.
Tips for Safe Removal
If you’re looking to remove a metal fence post with a car jack, there are some important safety tips to keep in mind.
1. Make sure the ground is stable and free of rocks or other potentially dangerous objects.
2. Jack up the car so that the weight is evenly distributed across the tires and brakes.
3. Place the post under the car, centered on the axle.
4. Drive down onto the post with your car’s weight, using your brake and gas pedal to help apply pressure.
5. Keep your hands close to the post to avoid getting hit by metal shrapnel.
6. If all goes well, the post should break and fall off of the car. Be prepared for it to swing back and hit you in the face!