Steering wheels can be a dirty and dangerous place – not to mention a place where bacteria can grow quickly. In this article, we’ll show you how to clean and protect your steering wheel, so you can keep it in perfect condition for when you need it.
What is the Steering Wheel?
The steering wheel is a control panel located at the center of a car’s dashboard. It is used to steer the car, and is also a place where drivers can rest their hands while driving. Steering wheels can become dirty over time, and can be damaged by wax, oils, and other substances.
How to Safely Clean and Protect the Steering Wheel in Your Car:
1. Remove any loose objects or debris from around the wheel. This includes items that may have been left behind by passengers or dropped on to the wheel while it was in use.
2. Clean the wheel with a mild soap and water solution. Make sure to use a cloth or paper towel to avoid leaving any water or soap residue on the surface of the wheel.
3. Once the cleaning has been completed, apply a protective coating to the wheel using a car care product such as Meguiar’s Ultimate Car Wax or Mothers Protectant Sealant. These products will help to prevent further damage and ensure that the steering wheel remains looking clean and new for longer.
How Do We Clean it?
If you’re like most drivers, you don’t think much about the steering wheel in your car. After all, it’s just a part of the vehicle that sits there doing nothing until you need to use it to turn the wheels. But if you’re like many drivers, you probably don’t clean it very often. And if you do clean it, you probably don’t protect it.
That’s a mistake. The steering wheel is one of the most important parts of your car, and it should be cleaned and protected regularly.
Here are Three Ways to Clean and Protect Your Steering Wheel:
1) Use a gentle cleaner. Most steering wheels can be cleaned with a gentle car cleaner or soap. Just be sure to rinse it off well before putting the car back in service.
2) Protect it with a cover. A cover can help keep the steering wheel clean and free from debris while it’s not in use. There are many covers available for purchase or as part of a retrofit kit.
3) Keep it clean and free from debris at all times. Keep your car clean by regularly cleaning all surfaces — inside and out — with a good car cleaner and drying them off thoroughly before putting the car back in service. And always protect the steering wheel by using a cover when it’s not in use.
How Do We Protect it?
It’s no secret that steering wheels can get dirty and greasy in a hurry, but it’s important to remember that they’re also susceptible to damage from bacteria and other contaminants. That’s why it’s so important to clean and protect them properly. Here are some tips for cleaning and protecting your steering wheel:
-Start by dusting it off with a soft cloth or a vacuum cleaner. Make sure to get into the crevices and corners.
-If the steering wheel is really dirty, you may need to use a specialist cleaner or a wet/dry vacuum cleaner with a steam function.
-If you don’t have either of those options, try using a mild dishwashing liquid or warm water with a little soap. Just be sure to rinse it off thoroughly afterwards.
-Finally, cover the steering wheel with a protective film or coating such as Gorilla Glass. This will help reduce the risk of damage from elements and bacteria.
Final Thoughts
A lot of people forget to take care of their car’s steering wheel. Not only is the wheel important in terms of function, but it can also be a pretty valuable item. If you don’t take care of it, your steering wheel could eventually become unusable or even damaged. Here are a few tips on how to safely clean and protect your steering wheel:
1. Always use a mild soap and warm water when cleaning your steering wheel. Do not use harsh chemicals or waxes, as this could damage the finish.
2. Keep your steering wheel dry by using a clean cloth or paper towel to blot moisture away from the surface. Do not use a vacuum cleaner – this could damage the surface.
3. Protect your steering wheel from scratches and dents by using a hard case or cover when not in use. You can also place a piece of plastic wrap over the top of the wheel when not in use to help keep it clean and free from dust and debris.