How to start a car with a broken key in the ignition can seem like a daunting task, but don’t worry! In this article, we will show you how to take care of this problem step-by-step.
Locate the Key in the Ignition
In order to start your car with a broken key in the ignition, follow these steps:
1. Locate the key in the ignition. It will likely be near the steering wheel. If it’s difficult to find, you can use a flashlight to help see it. You may also need to remove the dashboard or console cover in order to get to it.
2. Remove the battery from the car and disconnect the negative cable. This will ensure that you don’t start the car accidentally.
3. Use a socket wrench (or another tool that has a wide head) to turn the key clockwise until it begins to turn easily. Be careful not to over-turn it or you may damage the key cylinder locking mechanism. Repeat this process for each of the other keys in the ignition.
4. Reconnect all of the cables and replace the battery. Start the car and test drive it to make sure everything works properly.
Pry Off the Cover
If you have a car with a broken key in the ignition, there are a few steps you can take to start the engine. The first step is to pry off the cover over the key cylinder. This will give you access to the key chain and the key itself. You can then use a screwdriver to pop the key out of the ignition.
Remove the Key from the Ignition Module
If you have a car with a broken key in the ignition module, there are several steps you can take to start the car. The most common way to remove a key from an ignition module is to use a prying tool or wire cutters. However, there are other ways to get the key off if the prying tools don’t work.
Here are four methods for removing a key from an ignition module:
1. Use a Prying Tool: If you don’t have access to a wire cutters or a prying tool, you can try using a U-shaped prying tool to try and remove the key from the ignition module. Make sure that you use extreme caution when using this method, as the edges of the key can be sharp.
2. Use a Paperclip: If you don’t have access to a prying tool or a wire cutter, you can try using a paperclip to try and remove the key from the ignition module. Make sure that you use extreme caution when using this method, as the edges of the key can be sharp.
3. Use Bondo: If you don’t have access to either a prying tool or wire cutter, you can try using
Replace the Key in the Ignition Module
If your car has a broken key in the ignition module, you can replace the key yourself. This is an easy task that can be completed in just a few minutes. Here are the steps:
1. Remove the cover of the ignition module.
2. Locate the key plug and remove it by unscrewing it from the connector.
3. Lift out the old key and replace it with the new one.
4. Reinstall the key plug and connector, making sure they are secure.
5. Replace the cover and restart your car.
Replace the Cover
If your car key is broken and you can’t turn the ignition, there are a few things you can do.
The first thing to do is to replace the cover if it’s still available. If the cover is missing or damaged, you’ll need to remove the dashboard or console in order to get at the switch.
Once you’ve replaced the cover, carefully remove the key from the ignition cylinder. If it’s not possible to remove the key, try using a screwdriver to pry it out from behind the switch.
If your car has a remote start, you’ll need to replace that as well.