Starting a car is one of the most common tasks that we do on a daily basis. It’s probably something you take for granted, but it actually requires quite a bit of skill and knowledge to get the job done properly. In this blog post, we will show you how to start a car with ignition wires in under 5 minutes. This is an essential skill for anyone who wants to be able to fix or troubleshoot their car in the event of an emergency.
What You’ll Need
If you’ve ever started your car with the key, but it didn’t work, then you probably know that you need to use the battery. If you’re new to car ownership, or if your car is old and has been sitting in a garage for years, it’s likely that your ignition wires are corroded.
To start your car with the key, first make sure that the battery is fully charged. Next, disconnect the negative cable from the battery. Find and remove the spark plugs from your engine. Connect one end of a wire from each spark plug to an open terminal on your battery. Tighten each spark plug until it’s snug against the cylinder head. Reconnect the negative cable to the battery and replace any screws that were removed during Step One. Start your engine and check to see if it starts.”
How to Do It
The steps to starting a car with ignition wires are:
-Disconnect the battery cable
-Remove the negative battery cable
-Locate the four spark plugs
-Remove the spark plug wire(s) from each plug
– Connect one end of each spark plug wire to an engine ground wire
-Connect the other end of each spark plug wire to the positive battery cable terminal
-Turn on the engine
What to Do If It Doesn’t Work
If your car doesn’t start with the ignition wires, there are a few things you can do to troubleshoot the issue. Try different positions of the key, wait 10 minutes after turning the key on and off several times, disconnect and reconnect the battery, and check for obvious issues such as a broken wire or ignition switch. If all of these solutions fail to solve the problem, you’ll need to take your car into a mechanic for further inspection.
Conclusion
If you’re having trouble starting your car, or if it’s been awhile since you’ve gotten your car serviced, it might be time to check out our guide on how to start a car with ignition wires. This guide will walk you through the basic steps necessary to get your car started, and we even have a video that shows you step-by-step how to do it!