Most of us know that we need to turn the engine off of our car in order to avoid getting pulled over, but many of us might not realize the best way to do it. In this article, we will show you how to start your engine out of your car in the easiest way possible.
The Causes of Engine Out of Car
If you’re ever stranded on the side of the road with a dead car engine, don’t panic! There are many things you can do to get your car started again. In this article, we’ll take a look at some of the most common causes of engine out of cars and how to fix them.
The Basic Mechanics of an Engine Out of Car
The basics of an engine out of car are as follows:
1. Make sure the car is turned off and the keys are removed from the ignition.
2. Remove any objects in front of the engine that could obstruct it from getting moving. These include seats, buckets, etc.
3. If the car has a tow truck attached, disconnect the tow truck first.
4. Open the hood of the car and locate the battery. It will most likely be either on the left or right side of the car near the engine compartment. If you can’t find it, move to step 5.
5. If you cannot find the battery, use a voltmeter to test for 12 volts at both battery cables (positive and negative). The voltage should be between 12 and 14 volts per cable. If it’s not, then you’ll need to find another source of power to start the engine (such as a jump box).
Tools and Equipment You’ll Need to Fix the Engine Out of Car
You’ll need the following tools and equipment to fix the engine out of a car:
-Jackstands
-Axle wrench
-Flat head screwdriver
-Socket set
-Ratchet and socket
-Torque wrench
-Pry bar
-Jumper cables
-Radiator hoses and clamps
-Radiator fan (optional)
Once you have your tools and equipment, follow these steps to start the engine out of a car:
1. Park your car in a safe location with the engine off.
2. Remove the battery cable.
3. Place the jackstands in the appropriate locations and remove the wheels.
4. Loosen the lug nuts on each wheel using your axle wrench. Do not remove them yet.
5. Raise one end of the car using your jackstands until it is in a position where you can access the engine oil pan. Loosen the oil pan bolts using your socket set and ratchet and socket. Carefully remove the oil pan from the car. Be sure to note which bolt goes where!
How to Start the Engine Out of Car
If your car won’t start, there are a few things you can do to try and get it started.