Car washes are a necessary evil. They get us clean and rid of the stench of gasoline, but at what cost? One cost is the use of harmful chemicals and solvents. Another cost is the environmental damage caused by these chemicals. A more insidious cost, however, is that these chemicals can harm our bodies and minds. To make matters worse, many car washes don’t even use biocides to prevent the growth of bacteria. In fact, some car washes actually rely on wax to do their job! Fortunately, there are ways to cut down on the damage done by car washes without sacrificing our cleanliness or our environment. Let’s take a look at how you can use the wax at a car wash to improve both aspects of your experience.
What is Wax?
What is wax?
Wax is a type of car wash soap. It is a solid, petroleum-based product that comes in a variety of colors, including black, blue, brown, gray, green, and white. Wax is used to remove dirt and grime from cars.
How Do You Use Wax At A Car Wash?
When waxing a car, use a synthetic or natural wax. Apply the wax in a thick coat to the entire surface of the car. Work the wax into the paint using a cloth or applicator pad. Let the wax dry for at least 30 minutes before rinsing the car.
Tips for Cleaning a Car with Wax
Cleaning a car with wax is a great way to keep it looking its best. Here are some tips for using wax at a car wash:
1. Start by washing the car with the correct soap. Wax can be removed with soap and water, but it will not foam or suds like regular shampoo will.
2. Apply wax to a clean cloth or paper towel. Rub the wax into the surface of the car, working in circular motions. Do not apply too much wax, just enough to cover the surface.
3. Rinse the car off with plenty of water, rubbing well to remove all of the wax. Be sure to use a soft stream of water so that no dirt or clay is left behind on the paintwork.
4. Dry the car off completely before applying any sealant or protection products (such as Spray-On Shield).
Conclusion
There’s nothing like a good car wash to take your vehicle from clean to shining. Unfortunately, most car washes use harsh chemicals that can damage your paint and finish. To keep your car looking its best and avoid any damaging agents, follow these simple steps for using the wax at a car wash: 1) Choose the right soap. Most commercial washes use high-pH soaps that can etch the clearcoat on your vehicles. If you’re looking for a gentle way to clean your vehicle, opt for an acid-free soap like Dawn or Simple Green. 2) Make sure you’ve got supplies on hand. Car waxes generally come in two types: liquid and paste. Liquid wax is applied with a sprayer while paste wax is rubbed onto the surface of the vehicle with a cloth or applicator pad. Make sure you have both types of wax available before starting the wash; some washers may not allow paste waxes due to potential water contamination. 3) Wax carefully! Remember that excess wax will attract dirt and dust, which will make it harder to remove later with a cleaner agent. And don’t forget about wheel wells – those areas tend to be especially difficult to clean!