Waxing a car is a classic way to keep it looking its best. But, like any DIY project, there’s always a chance of disaster if you don’t do it right. In this article, we will walk you through the basics of waxing a car for beginners, so that you can avoid any mistakes and have a sleek car at the end of the process.
What You’ll Need
To wax a car for beginners, you’ll need a few things. These items include: wax, a microfiber cloth, warm water, and soap.
Wax:
You’ll need wax to apply to your car. There are a variety of options available, so choose one that is appropriate for the type of car you’re working on. Some Waxes are liquid while others are solid. Depending on the type of Wax you use, you may also need to apply a sealant afterwards to keep it from chipping.
Microfiber Cloth:
A microfiber cloth is essential for cleaning and polishing your car after waxing. Use it to buff the wax off of the surface and remove any residue.
Water:
Warm water is necessary for wetting down the microfiber cloth and applying pressure while wiping the wax off the car. This will help remove any residue and dirt buildup.
Soap:
Finally, soap will help clean and polish the surface of your car after waxing.
How to Wax a Car
There are many ways to wax a car, but the most common is using a hot wax. To wax a car, you’ll need some supplies: wax, cloth or paper towel, air compressor, safety goggles, and bucket. First, fill the bucket with warm water and place it near the air compressor. Next, take the wax and put it in the cloth or paper towel. Make sure that the cloth or paper towel is big enough so that the wax doesn’t drip onto your hands. Next, put on the safety goggles and start applying pressure to the wax with your hand. Keep applying pressure until you have a thick layer of wax on your car. Finally, use the air compressor to blast the wax off of your car.
Tips for Waxing a Car
Waxing a car can be a daunting task for beginners, but with a little preparation and following these tips, waxing a car will be easy.
1. Make sure the surface you are waxing is clean. Dirty surfaces will make the wax stick to the surface and create more work for you later on.
2. Start by prepping the area you want to wax with some lubricant or polish. This will help reduce friction and make the process of waxing go smoother.
3. Apply evenly coats of wax to your cloth or applicator pad, starting from one corner and working your way around the entire vehicle. Be sure to spend extra time in high-traffic areas where dirt and dust accumulate quickly.
4. Wax at a moderate temperature (between 37°-41°F), which will help avoid too much heat or cold melting the waxes prematurely. Be patient – it can take up to 30 minutes for a car to reach its desired finish level of shine!
5. Once the wax is fully applied, use a clean microfiber cloth to buff off any excess residue. Follow up with a final coat of polish or sealant if needed