Brake flushing is a process that your car’s brake system goes through when it needs to be cleaned or serviced. Brakes are important because they help to stop the car in an emergency. But how important are brake flushes?
What is a brake flush?
A brake flush is a routine maintenance procedure that is performed on your car’s brake system. It helps remove any residue that may have built up over time and allows your brakes to function properly. Brake flushes are typically recommended every 3 to 6 months, depending on how much traffic you drive and how often you use your brakes.
When should a brake flush be performed?
A brake flush is important when a brake system is maintained and inspected. A brake flushing will remove any built up dirt, dust, and debris from the braking system. This will help to keep your brakes working at their best and prevent stopping problems.
Benefits of a brake flush
Brake flush is an important maintenance process that can help your brakes work more efficiently. Here are four benefits of a brake flush:
1. Cleans and lubricates the brake system.
2. Prevents build-up of dirt, dust, and grime that can cause malfunctions.
3. Removes any harmful contaminants that could damage the braking system over time.
4. Reduces the need for regular brake service by keeping the brakes in good working condition.
How to perform a brake flush
Brake flushes are important to perform on a regular basis to keep your brakes working at their best. Here’s how to do it:
1. Park the car in a safe location with the hazard lights on.
2. Remove both front wheels by depressing the brake pedal all the way down.
3. Jack up the car, then remove the tire and wheel assembly.
4. Turn off the engine and remove the fuel tank.
5. Disconnect the negative battery cable.
6. Open the hood and remove the air cleaner housing and coolant reservoir.
7. Remove both front brake rotors by pressing down on one side of each rotor and pulling it off of the hub. Discard them in a safe location (clarification: Do not reuse them).
8. Pour a gallon or two of water into each Brake Fluid Reservoir (BCF) located on top of each brake drum, using a funnel if necessary (clarification: Do not use antifreeze or other type of brake fluid). Make sure all lube is removed from all moving parts before filling reservoirs (clarification: Use onlybrake fluid