Brake flush is an important maintenance task that should be done on a regular basis to keep your brakes in good working order. Here are four reasons why you should flush your brakes every time you do a brake job:
1. Brake dust and debris can collect on the brake pads and cause poor braking performance.
2. Flushing out the brake system helps prevent corrosion and build-up of rust on the calipers, pads, and discs.
3. Brake fluid can evaporate if it’s not flushed regularly, leaving behind moisture and toxins that can damage the lining of the brake cylinder.
4. Brake flushing also cleans up any debris that may have collected between the wheel and brake rotor.
What is Brake Flush?
Brake flush is a maintenance procedure that is typically performed on a car’s braking system every 50,000 miles or every two years, whichever comes first. Brake flush consists of flushing the brake fluid reservoir and the brake lines with fresh fluid. This helps to keep the brakes operating at their best, and prevents them from seizing up.
Brake flush is important for a few reasons. First, it keeps the brakes running at their best. If the brakes are not working properly, they may not be able to stop the car in time, which could lead to an accident. Second, it prevents the brakes from seizing up. If the brakes do seize up, they may not work at all and could lead to an accident. Finally, brake flush helps to maintain the car’s braking system. If the braking system starts to wear down, brake flush can help to restore it to its original condition.
When is Brake Flush Necessary?
Brake flush is important for a few reasons. First, brake fluid can become contaminated with acids and other contaminants over time. This can cause the brakes to stop working properly, or even cause a car to crash. Second, brake flush can help to remove old brake pads and other debris from the system. This will help to restore braking performance and keep your car running smoothly.
How to Perform a Brake Flush
The brake flush procedure is important for two reasons. First, it helps to keep your brakes clean and free of debris. Second, it helps to ensure that your brakes will function properly in the event of a emergency stop. Follow these steps to perform a brake flush:
1. Park your vehicle on a level surface with the parking brake engaged.
2. Open the driver’s side door.
3. Remove the brake caliper by depressing the quick release clip and pulling it off of the wheel.
4. Use a shop vacuum cleaner to clean all of the dust and debris from the caliper and surrounding area.
5. Wash the caliper in warm soapy water and rinse thoroughly.
6. Dry the caliper and wheel well thoroughly with a soft cloth or paper towel.
7. Install the caliper by reinserting the quick release clip, depressing it until it clicks into place, and tightening it with a wrench or pliers.
8. Reinstall the wheel by rotating it until it seats solidly against the hub and pressing down evenly on all four sides until it clicks into place.
9. Close the driver’s side door and engage the parking brake
What to Expect After a Brake Flush
Brake flushes are a great way to keep your brakes clean and working properly. Here are some things to expect after a brake flush:
-Your brakes will feel stronger and more responsive.
-The brake pads will have a longer lifespan.
-The brake fluid will be fresh and free of contaminants.