Brakes are an essential part of any car, and if they’re not working properly, you could end up in a lot of trouble. In this article, we’ll be discussing what you need to flush your Sram X01 brake system.
What are the Sram XBrakes?
The Sram XBrakes are a type of brake system that uses hydraulic fluid to stop the car. They are unique in that they use two pistons to apply pressure to the braking surface. This makes them faster and more efficient than other types of brakes, such as disc brakes.
To use the Sram XBrakes, you first need to bleed the system. This is done by filling the reservoirs with brake fluid and pumping it through the lines until the fluid reaches the pistons. Once the system is bled, you can start using it by pressing down on the brake pedal.
The Sram XBrakes are a great choice for drivers who want a fast and efficient braking system. They are perfect for cars that need to stop quickly, such as race cars or sports cars.
How to Flush Sram XBrakes
If your brake pads are feeling worn, it’s time to flush and replace them. This procedure is usually done when the pads start making a grinding or screeching sound. Here’s how to do it:
1. Remove the wheel(s)
2. Locate the brake fluid reservoir (usually on the front of the car)
3. Open the cap/hose and pour enough fluid into the reservoir to cover the pads (4-6 qt)
4. Close the cap/hose and rotate the wheel to distribute the fluid evenly over all four pads
5. Replace any worn or damaged parts
Conclusion
So you’ve just installed your new Sram X01 brake and now you’re having trouble flushing it. Don’t worry, this guide will walk you through the process of flushing your Sram X01 brake. Make sure to read all the steps before beginning so that you don’t end up doing something that causes more damage to your bike than good!