A brake system flush is a service your car mechanic performs to clean and maintain the braking system on your vehicle. The brake system consists of the master cylinder, brake lines, and calipers. A brake system flush can help rid your car of deposits that can cause your brakes to stick or make a loud noise when you apply them.
What is a Brake System Flush?
Brake system flushes are a great way to keep your brakes in top condition. By regularly flushing the brake system, you can avoid the buildup of debris that can lead to problems down the road. Here’s everything you need to know about brake system flushes:
What is a brake system flush?
A brake system flush is a procedure that involves washing and scrubbing the inside of your vehicle’s brake system. This is important because it helps to remove any build-up of debris or dust that may have accumulated over time. By doing this regularly, you can prevent any potential problems with your brakes.
How often should I do a brake system flush?
There is no one definitive answer to this question. However, generally speaking, you should perform a brake system flush every five years or every 3,000 miles. This will depend on your individual driving habits and the condition of your brakes.
How to perform a Brake System Flush on a Car
A brake system flush is a simple procedure that is often forgotten and can result in a degraded braking system performance. A brake system flush should be performed every 5,000 miles, or as required by your car’s manufacturer.
To perform a brake system flush:
1) Disconnect the battery cable. This will prevent any current from flowing to the brakes while you work.
2) Remove the four screws that hold the brake caliper bracket to the wheel hub. If you have replaced the calipers, remove them now.
3) Unplug the two connectors that go to each caliper (one on each side). You may also need to remove the clips that hold the caliper brackets to the wheel hub.
4) Remove both calipers from the wheel hub and set them aside. Note how each one is attached to its respective connector and bracket. This information will help you reinstall them correctly later on.
5) Loosen (but do not remove) the four bolts that attach the master cylinder to the chassis. You will need to do this in order to get at the bleed screw on top of the master cylinder.
6) Bleed all of the air out of the brake system. Use a vacuum cleaner to suction onto the bleeder screw on the top of the master cylinder and turn it clockwise. Do this until all the air has been bled out.
7) Replace the four bolts that you loosened in step 5, and tighten them to specification.
8) Reattach the calipers to their brackets and connectors, using the same method as before.
9) Replace the wheel hub assembly, screws, and caliper bracket clips.
10) Reconnect the battery cable and test your brakes by applying pressure to each pedal. If they are working properly, tighten the four bolts that hold the caliper bracket to the wheel hub.
What are the Benefits of a Brake System Flush?
If your car has a brake system flush, it can help to keep your brakes in good condition by removing any built-up brake dust and grime. Brake system flushes also help to clean and lubricate the moving parts of the brake system, which can make them more responsive when you need them to be. If you’re not sure if your car needs a brake system flush, consult your car’s owner’s manual or call a mechanic.
When should you perform a Brake System Flush?
The Brake System Flush is a preventative maintenance procedure that should be performed on your car once every three years. A brake system flush will remove any build-up of dirt, dust and debris from the braking system. By doing this, you can ensure optimal performance and safety when braking.
When should I schedule my Brake System Flush?
If you’re not sure when your last brake system flush was performed, you can usually check by looking for the manufacturer’s Certification Label located on the car near the driver’s side footwell. If your car doesn’t have a certification label, or if it’s been replaced, then it’s likely that your car has had a recent brake system flush.