Brake system flush is a maintenance procedure that is performed on the brake system of a vehicle to clean and adjust the brake fluid levels. A brake system flush can be done as part of a regular scheduled maintenance program or as a result of a warning light or diagnostic code.
What Is a Brake System Flush?
A brake system flush is the process of flushing out and cleaning your brake system. This is important to do if your system has been contaminated by brake dust, oil, or water. By flushing the system, you reduce the possibility of a brake failure.
What to Expect after a Brake System Flush
When your brake system needs to be flushed, there are a few things you can expect. Before the flush, your brakes may feel spongy or sticky; this is due to the buildup of old fluid. After the flush, your brakes should feel much smoother and less spongy. If you have any questions about what to expect after a brake system flush, don’t hesitate to ask your mechanic.
How to Perform a Brake System Flush
Brake system flush is a procedure that is used to clean and remove built-up brake dust and debris from the brake system. The flush is typically performed when the brakes are making unusual noise, or when the brake pads are starting to wear down.
Most vehicles come with a flushing kit that can be used to perform the procedure. To start, you will need to loosen the front and rear wheel nuts. Next, using a hose or bucket, fill the reservoir up with water and turn on the water supply to the car. Once the water reaches a full boil, drain it off and refill the reservoir. Now, use the hose to spray the brake system liberally with water. Let it soak for about 10 minutes, then drain off any excess water. Finally, use a vacuum cleaner to clean out any remaining debris from the system.