If you’re like most drivers, you probably think of the brake pedal as your emergency brake. But did you know that your car also has a flush brake fluid system? When it comes to braking, using both systems together can give you a better chance of stopping in an emergency.
What is brake fluid and How is it Used?
Brake fluid is a type of fluid that is used to help stop a car. Brake fluid is put into the brake system to help the brakes work properly. The brake pedal uses the brake fluid to stop the car.
Types of Brake Fluid
There are many types of brake fluid, but the most common are DOT 3 and DOT 4. DOT 3 is best for cold weather use, while DOT 4 is better for warm weather use.
How to Check if Your Brake Fluid is Low
If you have a brake system, it’s important to regularly check the fluid level in your system. Checking the fluid level will help to ensure that your brakes are working properly and will help to prevent any potential brake issues.
To check the fluid level in your brake system, first make sure that all of your brakes are working properly. Next, remove the cap on the reservoir and wait until the fluid has stopped flowing before putting the cap back on. Then, measure how much fluid is present in the reservoir. If the fluid level is low, then you will need to replace the brake fluid.
How to Fix a Low Brake Fluid Level
In a hurry to get to work? Don’t try to brake with a low fluid level! Here’s how to fix the problem:
1. Check the fluid level. The reservoir should be full or at the least have enough fluid to cover the brakes. Add fluid if necessary.
2. If the brake pedal feels heavy, the pads may be worn out and need to be replaced. This will also require replacing the fluid reservoir as well.
3. If there is no obvious issue, check for air bubbles in the brake fluid. Bubbles may indicate that the brake lines are kinked or clogged. If this is the case, you’ll need to replace all of the lines and reset the calipers.
When to Replace Brake Fluid
When your brake system needs to be flushed, it’s important to determine the side on which the fluid should be replaced. The master cylinder and ABS pump are located on the driver’s side of most cars, so brake fluid should be replaced on that side. If you’re unsure which side your car is on, look for a sticker on the firewall or underneath the hood that will tell you.
Conclusion
When you flush brake fluid, it’s important to remember which side the fluid goes on. The left side is for the front brakes, and the right side is for the rear brakes.