Ford Escape owners may need to know where the power steering fluid is located, as this information is not always plainly marked on the vehicle. Follow these steps to locate the power steering fluid location on your Ford Escape.
What Is Power Steering Fluid?
Power steering fluid is a viscous, colorless fluid that helps to guide the car’s movement through the steering wheel. It’s used to help keep the car moving in the desired direction and helps to avoid difficult turns or collisions. If power steering fluid isn’t flowing freely through the system, it can cause problems with the car’s movement and could even lead to a crash.
The easiest way to check if power steering fluid is low is to check the level in the reservoir. This can be done by removing the cap and filling it up until the liquid reaches the top of the container. If there is too much pressure inside of the reservoir, then it may mean that there isn’t enough power steering fluid available. To fix this, you’ll need to replace the reservoir or add more fluid.
If power steering isn’t working at all, then you’ll likely need to replace the entire system. This includes both the reservoir and pump assembly.
How to Check the Power Steering Fluid Level
If you own a Ford Escape, then you likely know that the power steering fluid can become low over time. This can cause your steering to feel stiff and less responsive, so it’s important to regularly check the level and replace the fluid as needed.
To check the level, first turn the wheel all the way to the left or right and pull back on the wheel. The level should be between the ” SERVICE” and ” FULL” marks. If it’s below “SERVICE,” then you’ll need to add fluid; if it’s above ” FULL,” then the fluid is already too high and should be replaced.
To refill the reservoir, open the hood and unscrew the cap on the reservoir. Pour in enough fluid to cover the bottom of the hole in the reservoir. Replace the cap and screw it back on tight. Be sure to follow safety precautions when refilling power steering fluids, such as using a funnel if possible.
How to Replace the Power Steering Fluid in a Ford Escape
If your Ford Escape is experiencing issues with its power steering, it’s time to replace the fluid. This guide will show you how to do it.
1. Park your Ford Escape in a safe location.
2. Remove the front wheel and tire.
3. Remove the front bumper cover by removing four screws located near the bottom of the cover.
4. Locate and remove the power steering fluid reservoir cap.
5. Pry off the power steering reservoir cover using a screwdriver or a small knife.
6. Fill the power steering fluid reservoir to the top with fluid and replace the cap.
7. Position the front wheel and tire back on the vehicle, reattach the bumper cover, and screw it in place.
Ford Escape Safety Tips
The power steering fluid is a reservoir that collects fluid from the power steering pump. The Ford Escape has several different types of power steering fluid, depending on the model year and engine.
If your Ford Escape is experiencing difficulty turning or feels heavy when getting into or out of a tight spot, it may need a new power steering fluid. Check your owner’s manual to see which type of power steering fluid your Escape uses and where to find it.