If you’re experiencing a loss of power steering fluid, it’s important to check the reservoir and fill it as necessary. Here’s how to do it on a Chevy Malibu: First, drive the car so that the parking brake is engaged. Open the hood and locate the power steering reservoir. On some Malibu models, you’ll need to remove two screws in order to access it. In other models, a push-pin will release the cover. Find the correct size power steering fluid container and pour in the needed amount of fluid. Replace the cover and screws and tighten them securely. Drive the car until the parking brake is released. Park the car and check for leaks before driving any further.
What is Power Steering Fluid?
Power steering fluid is a type of fluid used in cars to help move the car’s power from the engine to the wheels. It helps to control the car’s movement and makes it easier for the driver to steer. Power steering fluid is usually a red or pink color and is often found under the car’s hood.
How does power steering work?
Power steering works by using a pump to force fluid through a system of hoses and motors. This fluid helps to turn the wheel, making it easier for the driver to steer.
The Malibu requires power steering fluid in the reservoir located behind the driver’s seat. To refill the reservoir, remove the cover and unscrew the top of the reservoir. Be sure to fill it completely before screwing the top back on.
How to replace power steering fluid in a Chevrolet Malibu
If your Chevrolet Malibu has a power steering system, it likely needs to be serviced and the fluid replaced. Replacing power steering fluid is an easy job for most homeowners, but there are a few things you need to know in order to do it correctly.
First, make sure you have the correct tools. You’ll need a drain pan, funnel, Phillips head screwdriver, and oil filter wrench.
Next, remove the front bumper cover by removing the four screws located around the edge. Once that’s done, use the funnel to pour enough fluid into the pan so that it covers the screwdriver. Replace the cover and screws.
Now take your Phillips head screwdriver and remove the seven screws holding on the power steering reservoir cover. Carefully remove cover and set it aside.
Underneath the reservoir cover is a filter element. Remove this by unscrewing it with your filter wrench. Make sure to discard it or clean it off before replacing the cover.
Once all of these components are out of the way, you can start to replace the power steering fluid itself. Unscrew and remove the old pump assembly from atop of the reservoir. Replace it with a new one and tighten everything
What to do if power steering fluid leaks
If you notice power steering fluid leaking from your Chevy Malibu, there are a few things you can do to fix the problem. First, try to determine where the leak is coming from. You may need to drain and replace the power steering fluid pump and reservoir if the leak is coming from these parts. If the leak is coming from other areas of the car, you may be able to fix it with a few simple repairs.
Conclusion
If your Chevy Malibu is experiencing trouble with its power steering, it might be time to add a bottle of power steering fluid to your car’s tool kit. Follow these instructions to find and add the correct fluid to your Chevy Malibu.