This is a question that many people face on a regular basis, especially those who own a car. When you change a tire, where should you put the jack? Should it be in the trunk or under the car?
What You’ll Need
If your car has a jack in the trunk, you’re all set. Otherwise, here’s what you’ll need:
-A lug wrench
-A jack
-An impact wrench
-A tire changer or spare tire
-Wheel chocks
-A safe place to stand while changing a tire
Assuming your car doesn’t have a jack in the trunk, here’s what you’ll need:
-A lug wrench
-An impact wrench
-A tire changer or spare tire
-Wheel chocks
-A safe place to stand while changing a tire
1. Locate the lug nuts on the wheel being changed. Use the lug wrench to remove them. If the wheel does not have studs, use a socket wrench instead. Save the nuts and studs for later.
2. Turn the wheel so that it is facing away from the car and use the impact wrench to remove the hubcap. Save both pieces for later.
3. Remove the four bolts that hold on the tire. Save these for later as well. Note: If your car has air pressure sensors, be sure to replace these before removing the tire! (
How To Do It
When you change a tire on your car, you’ll need to use the jack to lift the car. There are a few different places you can put the jack, depending on what kind of jack you’re using.
If you’re using a floor jack, place it on the ground next to the car.
If you’re using a upright jack, place it in the air and hook it around the frame of the car.
If you’re using a ladder, stand on one end and reach up to hook the other end around the car’s frame.
Tips For Safe Tire Changeovers
When changing a tire, always use a safe and secure place to position the car jack. Some suggestions for safe places include:
– parking in a garage or driveway;
– using a designated jack stand in your garage;
– using a sturdy bench at the side of the road;
– tying down your vehicle with straps or cables.
Conclusion
When changing a tire, it is important to be aware of the placement of the car jack. The jack should be placed as close to the tire as possible so that leverage can be applied evenly to both tires. Additionally, ensure that the car jack is secure before starting to change the tire; if it wobbles, this could cause damage to either the vehicle or the jack. Finally, do not over-stretch or force the wheel nut when removing or replacing a tire; this could loosen it and cause injury.