In the event that your car’s ignition fuse goes out, you might be wondering how to start the engine. Well, there are a few different ways to do it depending on the make and model of your car. In this article, we’ll show you how to start a car with no ignition fuse using each method.
What is a Ignition Fuse?
A fuse is a small, thin wire that helps prevent your car from starting if there is a problem with the ignition. The fuse typically protects the battery and starter motor. If the fuse blows, you will need to replace it in order for your car to start again.
How do I change the Ignition Fuse?
If your car won’t start, there is a good chance that the ignition fuse has blown. Many times this is an easy fix, but sometimes it’s more complicated. Here are some tips to change the ignition fuse:
1) If you can access the fuse box, it’s easiest to do this before you take your car in for service. Check the fuses one by one and replace any that have blown. Be sure to replace the fuse with the same amperage as the one that blew.
2) If you don’t have access to the fuse box, you’ll need to get your car towed in for service. At the service station, they’ll be able to change the fuse for you. Make sure to bring along your car’s paperwork and any relevant information like model and year of your vehicle.
What are the Symptoms of a Fuse That Doesn’t Work?
If your car doesn’t start, there’s a chance that the ignition fuse may be defective. Here are some of the symptoms of a fuse that doesn’t work:
1. The car won’t start even after you replace the fuse.
2. The car will start sporadically, but then it will stop working again.
3. The car will start but then die after only a short time.
4. The car won’t start at all, even with the key in the ignition
How to Test if a Fuse is Bad
If your car won’t start without the ignition fuse, there is a good chance that the fuse is bad. Here’s how to test it:
1. Remove the battery cable from the car’s negative terminal. This will prevent the car from starting.
2. Disconnect the power source to the fuse box by disconnecting the black and white wires coming out of the box.
3. Turn on the power to the fuse box and wait until it starts blinking. This means that one of the fuses inside is blown.
4. If you have more than one fuse in the box, replace the bad fuse with a new one. Reconnect all of the wires to the box and put everything back together.
5. Replace the battery and test your car to see if it starts properly now.
How to Replace an Ignition Fuse on a Car
If your car’s ignition won’t start, it’s likely that the fuse protecting the battery is blown. Replacing an ignition fuse is a simple job that can be done by most car owners. Here’s how to do it: